Flexible Kitchen Faucets

Flexible kitchen faucets in this collection use a spring-covered or flexible hose arch above a deck-mounted mixer body. The selection covers 57 complete catalogue references across 8351–8352, 8355–8359, 8362 and 8372–8379. Compare the head, support arm and control position before choosing a style for a wholesale range or kitchen project.

Flexible Kitchen Faucets: Representative Comparison

8357A and 8357B show a spring-covered arch with a horizontal support. The 8358 pair uses a flexible arch and a different head profile, while 8359A has a simpler arch without the same horizontal bar. These visible differences affect the shape of the display range; actual reach and head movement still need confirmation.

8362 uses a horizontal support bar and a narrow control lever. Its five references retain the same general outline with different pictured appearances. The 8372 and 8373 groups return to spring-covered arches. The 8373 images also show a lower projecting outlet arrangement, which should be checked on the selected assembly drawing.

8374 and 8375 show flexible arches with different support profiles. The later 8376–8379 groups vary the support arm, mixer body and control shape again. Some references show a white or grey hose rather than black. Specify the complete suffix, not just the four-digit family number, when requesting matching samples.

Flexible Kitchen Faucets: Additional Designs

8351 uses a ribbed flexible-looking neck, a broad head and a wider side lever. Beside it, 8352 shows a purple hose arch and narrow pin control. The catalogue calls both kitchen faucets, not confirmed pull-out models. Request the permitted head movement and working reach instead of assuming a retractable hose.

8355A and 8355E show a horizontal support bar under the flexible arch. The 8356K-1, 8356K-2 and 8356K-3 pictures show unsupported arches in black, red and grey. Their lever profiles also differ from 8355. Keep the full code with the approved picture; the suffix does not establish an alloy, coating process or shared operating function.

Complete Catalogue Model List

8357A, 8357B, 8358A, 8358B, 8359A, 8362A, 8362B, 8362E, 8362C, 8362K, 8372A, 8372B, 8372E, 8372C, 8372K, 8373A, 8373B, 8373E, 8373C, 8373K, 8374A, 8374B, 8374E, 8374C, 8374K, 8375A, 8375B, 8375E, 8375C, 8375K, 8376A, 8376B, 8376E, 8376C, 8376K, 8377A, 8377B, 8377E, 8377C, 8377K, 8378A, 8378B, 8378E, 8378C, 8378K, 8379A, 8379B, 8379E, 8379C, 8379K, 8351, 8352, 8355A, 8355E, 8356K-1, 8356K-2, 8356K-3.

Installation and Purchasing Details

A flexible arch does not establish a retractable pull-out mechanism. Compare the separate pull-out kitchen faucet collection if hose extraction is essential. Ask for a demonstration and the working reach before specifying the operating method. Do not infer spray modes from a visible button or head shape.

Coordinate the faucet with the kitchen sink collection. Check the mounting hole, sink-bowl position, overhead clearance and room behind the handle. For a rigid outlet instead, compare the deck and wall-mounted kitchen mixer selection. Obtain dimensions for the actual reference before approving a kitchen drawing.

For project coordination, consult the VA plumbing design manual. This is external design guidance, not a product certificate. The project designer should define operating conditions and local evidence requirements for the chosen assembly.

Faucet MOQ is 200 pieces per style. Typical production lead time is approximately 20–35 days. Packing uses kraft paper boxes and EPE pearl-foam cushioning, adjusted to customer requirements. Confirm the selected finish and supplied components in the quotation before placing the order.

Send full model codes, quantities, destination and installation drawings through the quotation contact page. Request a model-specific drawing and sample approval before production. A catalogue photograph is a selection reference, not a substitute for an agreed specification.

Buyer Questions

Are all flexible designs retractable pull-out taps?

No. The images establish the arch and support shape, not a retractable mechanism. Confirm head movement and working reach for the selected model.

Do colour suffixes prove PVD or a particular alloy?

No. Use the full code to request a finish sample and written material specification. A pictured colour does not establish the coating process.

What is the order basis?

MOQ is 200 pieces per style, with typical production of 20–35 days. Confirm packing, finish and supplied parts against the selected reference.