2051A Bathroom Suite: Toilet, Basin & Bidet
Categories: Toilet & Bidet
Product Selection & Project Quotation
Choose the model and configuration for your project. Send product codes, quantities, destination and installation drawings for a model-specific quotation.
Model Specifications: Confirm materials, dimensions and the required finish against the selected model and approved drawing.
Supplied Components: List the product, fittings and accessories included in the quotation; pictured items are not automatically one package.
Order Terms: Confirm MOQ, production timing and packing by model. OEM changes require separate confirmation.
Project Documentation: Request certification or test documents for the exact model, specification and destination where required.
Request a Model-Specific Quote
Send your model list and project requirements through the enquiry form below. Confirm the approved specification and supplied parts before ordering.
The 2051A bathroom suite sheet shows a close-coupled toilet, a 330A wall-hung basin and an F0051 bidet. Only the basin is labelled wall-hung. Select the individual fixtures and confirm the quotation contents before treating the illustrated room as a supplied set.
2051A Bathroom Suite: Toilet, Basin & Bidet
The toilet has a floor-supported base and separate tank. The basin is shown with an angular outline and wall-hung installation. The bidet has a floor-supported base and a rear wall fixing note. These different mounting arrangements belong on separate installation drawings.
2051A close-coupled toilet with separate basin and bidet references
2051A bathroom suite components
- 2051A: rimless washdown close-coupled toilet, 690 × 355 × 835 mm.
- Toilet outlet: the catalog specifies P-trap, 180 mm outlet reference.
- 330A: wall-hung basin, 520 × 440 × 385 mm.
- F0051: bidet, 567 × 350 × 400 mm, with rear wall fixing noted.
- Order scope: confirm seats, flushing fittings, basin fixings, taps and wastes separately. The room photograph does not establish their inclusion.
2051A bathroom suite dimensions and mounting
| Specification | 2051A toilet | 330A basin |
|---|---|---|
| Type | Washdown close-coupled toilet | Wall-hung basin |
| Primary material | Ceramic fixture | Ceramic fixture |
| Illustrated appearance | White, angular outline | White, angular outline |
| Model reference | 2051A | 330A |
| Mounting | Floor-supported; confirm fixing drawing | Wall-hung; confirm fixing drawing |
| Catalog dimensions | 690 × 355 × 835 mm | 520 × 440 × 385 mm |
| Connections | P-trap; 180 mm catalog reference | Confirm inlet, waste and supplied fittings |
| Flushing label | Rimless washdown | Not a toilet |
| Documentation | Request model-specific compliance documents | Request model-specific compliance documents |
Project selection and production conditions
First, compare the toilet outlet with the site drain. Then confirm the basin support and bidet fixing method with the project installer. Check service access and the space around each fixture before finalizing quantities.
For ordinary ceramic toilet orders, standard FCL preparation takes 7–15 days after receipt of the deposit. Sample or trial LCL production takes 7–10 days. New OEM moulds and structural confirmation require an additional 7–10 days. Confirm the selected model schedule; these periods exclude sea transit.
State each model quantity, outlet and required fittings. Request the model-specific MOQ, packing dimensions, gross weight and loading plan in the quotation. Smart-toilet MOQ and packing terms do not automatically apply to these fixtures.
For US tank-type toilet projects, review EPA WaterSense toilet guidance. A rimless label does not establish certification or a measured water-saving percentage. Request the exact model documentation required by the destination market.
Request the selected 2051A configuration
A 250 mm S-trap can be customized for floor-outlet toilet configurations. Specify the floor-outlet version and request its installation drawing. This does not change the catalog-listed P-trap or wall-hung configuration; confirm the exact model and supplied components.
Related products
-
Toilet & BidetWashdown One-Piece Toilets: 0805 & 0866
-
Toilet & Bidet
Vortex Flush One-Piece Toilets: 8023–8096
-
Toilet & Bidet
8004 One-Piece Toilet: Compare Catalog Models
-
Toilet & Bidet
SM-2022 One-Piece Toilet: Jet Siphon B2B Supply
Trusted Bathroom Manufacturer
Bathroom Source Manufacturer
9Creat has always been driven by providing excellent solutions to our customers, specializing in bathroom products. With advanced technology, professional team and rich industry experience, we have become a reliable source factory in the global sanitary ware field.
Our Story
Manufacturing Milestones Since 2011
9CREAT’s ceramic factory was established in Chaozhou in 2011. Its hardware factory was established in Nan’an in 2014 and relocated to Wenzhou in 2017. These two operations support OEM and wholesale supply of ceramic toilets and bathroom hardware.
High-end bathroom integration customization
One-Stop Service
From design to production, the whole process of attentive service, save your heart and energy. Selection of environmentally friendly, durable, high-quality materials to ensure that every detail stands the test of time.
