T7 Compact Smart Toilet: 580 mm Version Options

The T7 compact smart toilet has a white floor-standing body and a rounded front. The catalog gives 580 × 380 × 450 mm dimensions and 300/400 mm S-trap options. Specify Basic, High or Top and one drain variant before requesting a B2B quotation.

T7 compact smart toilet: body and supply requirements

1. Built-in ceramic tank and water-supply checks

The sheet lists a built-in ceramic water tank and illustrates its internal arrangement. A tank reference does not establish operation at zero inlet pressure. First, send the site water-supply conditions and request the tested operating range for the chosen T7 configuration.

The confirmed packing table lists 40.3 kg net weight including water in the tank, 43.8 kg main-carton gross weight and 66 × 45 × 57 cm carton dimensions. These are main-carton figures only. Confirm accessories, any separate packaging and the final loading plan.

2. Confirm the 580 mm projection and floor outlet

The catalog shows a 580 mm long, 380 mm wide and 450 mm high body. It lists floor-drain S-trap offsets of 300 or 400 mm. Select one, then check fixing points, drain position and required clearances against a model-specific drawing. Shorter projection alone does not prove code compliance.

3. Match certification to the purchased configuration

Specify the destination and required certification before ordering. Request current documents covering the exact model, plumbing components and electrical version. The logos on the T7 catalog are not enough to establish blanket WaterMark, SAA or European-market compliance.

T7 compact smart toilet: washing and optional functions

• Washing and heated seating: the sheet lists rear and feminine wash, nozzle adjustment, heated water and warm-air drying. Confirm adjustment ranges and supplied controls.
• Foam shield: the configuration table marks this for Top, not Basic or High. Confirm the refill container and compatible liquid.
• UV function: the table marks High and Top. The image does not prove medical-grade sterilization or a bacterial-reduction result.
• Opening controls: Basic marks manual lid operation and foot-touch flushing. High and Top add automatic and foot-touch lid/seat opening.

T7 compact smart toilet: version comparison

T7 compact smart toilet: procurement questions

MOQ is 20 units. Production takes 30–45 days after deposit confirmation, excluding transport. Packing uses a five-layer corrugated carton. Confirm the foam layout: the supplied table excludes full-surround foam for this model.

Compare the smart toilet range and washing-equipped bidet configurations. Send the version, quantity, drain drawing and destination through the quotation contact page. WhatsApp: +8617706399903.

For water-efficiency information, see EPA WaterSense toilet guidance. This reference does not certify either model.

A 250 mm S-trap floor-outlet version can be customized for this toilet series. This is an order-specific option, not the default for every version. Other catalog-listed outlet options remain available; specify one outlet and approve its installation drawing before production. Mains voltage and power plug can be customized for the destination. Send the destination country, required voltage and plug reference with the RFQ. Confirm the selected electrical configuration and applicable model-specific documents before ordering. Plug selection does not establish certification for every version.